What you'll need
- A voice-over of a quote, 15–30 seconds, as a clean voice-only file
- After Effects with Captyne 1.5.9 or later
- A caption preset with three styles: Normal, Emphasis and Style 3. Step 4 shows how to add Style 3 if yours has only two.
- Optional: a few .ffx animation presets you like, and music to add at the end
Step 1Set up the comp and voice-over
- Create a comp at 1920×1080 (or 1080×1080 for a square post), the length of the voice-over plus a second or two at the end.
- Import the voice-over and drop it in at the start of the comp.
- Add a dark solid as a temporary background. You'll replace it in Step 7.
Don't add the music yet. Captyne transcribes the comp's audio, and a music bed makes transcription less accurate. Add music after the captions are generated.
Step 2Transcribe the quote
- Open Captyne. On the Setup tab, set Source Type to Active AE Comp and pick a Provider.
- Set Emphasis Strategy to Manual. In typography, you want to choose every big word yourself.
- Click Transcribe.
- In Review Transcript, check the quote against the original text, word for word. Quotes are the one place where "nearly right" isn't good enough. Fix capitals too: what you type is exactly what's shown.
- Click Looks good — go to Preview →.
Step 3Choose a layout
Kinetic typography lives or dies on layout. Captyne gives you two good starting points.
Option A: stacked blocks (the poster look). On the Preview tab, open the Stacked Blocks card and switch on Stacked blocks. Each phrase becomes a block of short lines, each line sized to its own words.
| Setting | For a quote video | Why |
|---|---|---|
| Words / Block min–max | 2 – 5 | One idea per block |
| Line padding (px) | Small | Tight leading looks typographic |
| Jitter | Off | Clean, centred alignment suits quotes |
| Block position | Centre | The text is the subject, so give it the middle |
| Put two short words side by side | On | Stops "of the" taking two lines |
With Individual Pro or higher you can also click ✨ AI Stacking, and the AI decides where blocks break and which word goes big. See Stacked caption blocks and AI Stacking.
Option B: clean lines (the editorial look). Leave stacking off and use Words / Phrase 4–6 and Words / Line 2–3. Each phrase sits as two or three neat lines.
Scrub the Interactive Preview. Breaks should fall where the speaker breathes. Drag a word to another line, or split a group, wherever a break feels wrong.
Step 4Give it a Style 3 hero word
In a quote video, one word per block should be the hero: much bigger, a different font or colour. That's what Style 3 is for, with Emphasis as a quieter second level.
If your preset has no Style 3:
- Open the preset's comp in After Effects (or click + New Preset and choose 3 — Normal + Emphasis + Style 3 under Number of Styles).
- In the Captyne panel, under ADD NEW STYLE LAYER, choose Style 3 and click + Add Layer.
- Design it: a heavier weight, about twice the Normal size, or a contrasting serif.
- Optional: select the Style 3 layer and add a smart effect such as ✨ Shine (light sweep) or 🔍 Blur → Focus from ADD SMART EFFECT. It tracks each word's size and position.
- Click Capture Preset to save.
Then assign the hero words: in the Interactive Preview, click a word chip to cycle it Normal → Emphasis → Style 3. Pick one hero per block: a noun or verb that carries the meaning ("courage", "begin"), not "the" or "and".
Read the quote out loud and notice which word you lean on. That's your hero word.
Step 5Reveal words as they're spoken
On the Setup tab, set Reveal Mode to Cumulative Words. Each word appears the moment it's spoken and the block builds up, which is the heart of kinetic typography. It's also the mode that suits stacked blocks best.
If you changed the reveal mode after transcribing, click Refresh Preview on the Preview tab. Then click Generate Captions. You should see every word land in sync with the voice, with your hero words at full size.
Step 6Add your own animation
To give the piece a signature entrance, add your own After Effects animation presets on top of the caption preset:
- On the Preview tab, find Your Own Animations (.ffx).
- Next to Normal words, click + Add .ffx and pick a subtle entrance: a short blur-in, a tracking change or a small scale-up.
- Next to Emphasis words, add something with a bit more energy.
- Switch on Remove the preset's own effects first only if you want your animation alone.
- Generate again.
The .ffx slots are for Normal and Emphasis words, so give the Style 3 hero its motion inside the preset (Step 4). Stick to Scale, Opacity, Rotation, effects and text animators: presets that animate Position can move words out of their place in the line. For building a preset from scratch, see Add a bounce-in to every caption word.
Step 7Background and camera polish
Captyne builds real After Effects layers, so every normal AE tool works for the finish:
- Background: replace the solid with a slow Gradient Ramp or a subtle Fractal Noise texture at low opacity. Keep it darker than the text.
- A slow push-in: select the ACP_MASTER null and keyframe its Scale from 100% to about 108% over the whole quote, with Easy Ease. Every block drifts closer, like a camera dolly.
- Real camera depth: if you want parallax, make background elements 3D and add a camera with a slow move. The caption layers stay 2D, so the text stays sharp and in place while the background moves behind it.
- Motion blur: click Select All Captyne Layers at the top of the panel, choose Layer → Switches → Motion Blur, and turn on the comp's motion blur switch. Entrances instantly feel smoother.
- Music: add it now, low under the voice.
End on the last block for a second or two before fading out, so the final words have time to land.
Typography that times itself
Stacked blocks, Style 3 and Your Own Animations are included in every Captyne plan. AI Stacking comes with Individual Pro and up.
See Plans & Pricing →FAQ
What is kinetic typography?
Text that moves in time with speech or music, where the layout, size and motion of the words carry the meaning. Captyne handles the timing and layout, and you design the look.
Can I make kinetic typography without keyframing every word?
Yes. Captyne times every word to the voice-over and applies your preset's animation per word, driven by markers. You only keyframe the overall moves, like the push-in on the master null.
Can I use more than three styles?
Yes. You can add more style layers (Style 4 and up) to a preset with ADD NEW STYLE LAYER, then capture it again. For a quote video, three levels are usually plenty: Normal, Emphasis and one hero style.
Where can I learn to build my own typography preset?
See How to create your own caption preset in the Help Centre.